3.PU Foaming machine-上海中吉机械有限公司官网

1. Scope of application of this type The glue machine is designed for the composite board assembly line with a small coating area, including building materials, furniture, textiles, automobiles, sporting goods and other industries. Main application: composite panels such as purification panels, fire doors, wall panels, and household panels. 2. Suitable for one-component glue (such as polyurethane glue), with a viscosity range of 100 – 20000mPa.s two-component glue (such as: polyurethane glue), with a viscosity range of 100 – 20000mPa.s 3. Function introduction The machine is used to accurately measure one-component glue or two-component glue, and evenly coat the surface of the workpiece. According to the characteristics of the glue, it can be equipped with functions such as automatic feeding, automatic heating, automatic cleaning, nitrogen filling protection, and overpressure alarm. 4. Working principle Since the glue should not come into contact with the air too much, the entire glue circuit is designed as a closed type, namely: raw material large rubber barrel (200L) & rarr; chemical automatic feeding pump & rarr; host intermediate tank & rarr; filtration & rarr; precision metering & rarr ;Spray

Parameters	Unit
Main function	Longitudinal movement of the two-axis actuator (X-axis: horizontal movement of the glue head on the rail; Y-axis: manual adjustment of the up and down of the glue head); Built-in automatic glue application program (the glue track is customized by the manufacturer, and the workpiece margin can be Manual setting); Automatically clean the left and right workstations after the glue is sprayed; The glue storage barrel has automatic heating function;
Power source	Voltage 380V/220V, 50Hz.
Maximum glue output	8kg/min
Range of coating width	0～1250mm
Positioning accuracy	±5mm/10000mm
Low pressure foaming machine material tank	Volume 30L
Automatic cleaning of the tank	Volume 18L
Electronic control system	Electric control system Independent control; automatic feeding system; with over-current, over-load, short-circuit, and lack of equal protection.
Service life	Except for wearing parts, the design life of the equipment is ≥10 years.