[!--temp.gahead --] [!--temp.gabody --]

Stacker


This process is designed to stack finished panels efficiently at the production speed.
It is very important that the stacking speed should not be slower than panel production speed.
It is possible to stack panels by an automatic or manual operation.

Stacker capacity:

Minimum length 2,000mm at 5m/min.
Piling height 200 ~ 1,000mm
Panel thickness 30 ~ 150mm
Cover width 1,000mm
Length Max.15m (stacker length : 14m)
Weight Max.17kg/m2

1. High speed conveyor
Conveying the cut panel (single panel) from cross cutter to stopper conveyor by high speed.
Type Roller Driving Type
Drive 2 Hp, AC Motor
Frame C-Channel 60 ´ 200mm
Conveyor Roller Æ88mm × 1,333.6mm (L) (Rubber Coated)
Conveyor Size 1,222mm(H) × 1,340mm(W) × approx. 15,000 mm (L)

2. Stopper conveyor
This unit is the last conveyor where the panels from hi-speed stand by to be lifted to the stacker and is able to cover the max. 18m panel in length. It has the stoppage device to smoothly stop the panel that is moved at high speed.
Type Roller Driving Type
Drive 1 Hp, AC Motor ´ 4 Ea
Conveyor Roller Æ88mm × 1,333.6mm(L) (Rubber Coated)
Conveyor Size 1,222mm(H) × 1,340mm(W) × approx. 18,000 mm (L)
Panel Stopper Air Cylinder (Æ40mm × 75mm)

3. Stacker
This unit convey the panels from the stopper conveyor, to the stacking conveyor or movable pallet while absorbing the panels by the vacuum pad.
Type Panel stacking by air suction
Vacuum pad size Æ150-70 ea
Lifting up-down by Air Suction Worm screw twisting by lack
Gear Up-down length Approx. 1,500mm
Traveling Range Approx. 2.000mm
Suction Valve Æ25 × 100mm stroke Air
Cylinder Drive system
Stacking part Induction motor (AC 15Hp) Reducer --> worm reducer (1/60) Jointing --> chain coupling
Traveling part Induction motor (AC 7.5Hp) Reducer: worm reducer (1/30) Jointing: chain coupling

4. Turnover device
This unit overturns (rotate through 180o) the roof panels to achieve a space saving stacking of panels with stacking the roof panels into each other.
Type Panel Lift & Turnover by Air Suction
Vacuum pad size Æ125-30EA
Conveyor size 1,222mm(H) × 1,340mm(W) × approx. 11,000 mm (L)
Conveyor roll Æ90mm × 1,200(L)mm
Adjusting cylinder Air cylinder (Æ80mm, 200 stroke-16sets)
Turning drum Approx. Æ90mm
Conveyor drive Free rolling
Turning drive AC 10Hp, 3 Hp pump
Jointing Chain coupling (#CR6018)


Online Message

Reminder: In order to get in touch with you in time, please be sure to fill in your contact information and demand information completely. You can enter your demand, such as the model of the product, testing materials, and the budget range of the product; you can also use your mobile phone Call our account manager.
Product name: Contacts:
*Tel: *E-mail:
Requirement:
     
Recommend