Glass fiber reinforced plastic resin dispenser


The FRP resin spraying machine is a fully automatic spraying machine which integrates the imported metering pump and the imported spray gun. The atomization degree is regulated by controlling the atomization gas pressure.

Main feature:
1. Function introduction: The spraying machine is used to automatically and uniformly spray the surface of the FRP after the precise proportion and measurement of the main agent and the curing agent.
2. Improve efficiency: The glass fiber reinforced plastic resin foaming machine completely replaces manual spraying, which greatly improves the production efficiency and reduces the production cost.
3. Environmental protection device: At the same time, the equipment is equipped with an environmental protection device for centralized absorption and treatment of waste gas generated by spraying unsaturated resins to reduce production pollution.
4. Scope of application: FRP resin spraying machine is suitable for cabin covers, auto parts, sanitary ware, industrial anti-corrosion, waterproof engineering and other industries.
5. Applicable coatings: unsaturated resin viscosity below 10000mps, ratio range: 100:1~100:3.
Technical parameter:

parameter

unit

The main function

Longitudinal movement of the two-axis actuator (X axis: the lateral movement of the spray head on the line rail;  Y axis: the upper and lower manual adjustment of the spray head); Built-in automatic glue application program (the glue spray track is determined by the manufacturer, and the workpiece margin can be adjusted Manual setting); The left and right stations are automatically cleaned after gluing; The glue storage bucket has automatic heating function

Power supply

Voltage 380V/220V, 50Hz

Maximum glue output

8kg/min

Coating width range

0~1250mm

positioning accuracy

±5mm/10000mm

Low pressure foaming machine volume 30L
Automatic cleaning tank volume 18L
Electronic control system Independent control; automatic feeding system; with overcurrent, overload, short circuit protection
Service life Except for wearing parts, the design life of the equipment is ≥ 10 years


Online Message

Reminder: In order to get in touch with you in time, please be sure to fill in your contact information and demand information completely. You can enter your demand, such as the model of the product, testing materials, and the budget range of the product; you can also use your mobile phone Call our account manager.
Product name: Contacts:
*Tel: *E-mail:
Requirement:
     
Recommend