6.Stacker-上海中吉机械有限公司官网

The palletizing is composed of a high-speed moving conveyor roller, a high-speed conveyor parking device, a roof panel turning device, a horizontal stacker, and a conveyor roller. The roof panel turning device can turn odd-numbered roof panels by 180°, so that the waveforms of the panels are aligned to save space, and the stacking efficiency is doubled. The stacked plates are transported to the baler for packaging through a conveyor roller.
Features: Push plate form, manipulator gripping rotation mode:
The board surface is not stressed during the first unloading, which protects the board surface quality and avoids the damage to the board surface caused by the traditional suction cup stacking with polyurethane (rock wool) composite boards of more than 100mm.
Secondly, it avoids the phenomenon of leaking and falling of the small corrugated board with suction cup stacking. The palletizer configured in the production line adopts a disc electric rotating device, which must be safe and reliable. When the power is cut off and the air source is cut off at the same time, the lifting roller table, the clamping device, and the roller table can still maintain the original state of the workpiece, and the power is self-locking. . In order to restore power and ventilation or manual treatment, it is safe and reliable.
The turning of the palletizer makes the acceleration and deceleration stable by adjusting the frequency converter. After reaching the predetermined position, it brakes quickly and is positioned accurately. The turning roller table and the push plate device are stable and reliable, and the stacking is neat.

Parameters	Unit
Fast roller motor power	1.5～2.5kw
Fast roller conveyor speed	30m/min (with frequency conversion speed regulation)
Suction cup lifting stroke	≥1200mm
Moving distance of beam	4500mm
Driving to increase motor power	9.5 kw
Stacking board length	Up to 16m
Stacking width	Maximum 1200mm