Building Panel


1. Scope of application The glue machine is suitable for industries such as building materials, furniture, textiles, automobiles, and sporting goods. Mainly applicable: automatic spraying of aluminum honeycomb panels, thermal insulation pan

1. Scope of application The glue machine is suitable for industries such as building materials, furniture, textiles, automobiles, and sporting goods. Mainly applicable: automatic spraying of aluminum honeycomb panels, thermal insulation panels, decorative panels, aluminum corrugated panels, stone honeycomb panels and other building materials industries. 2. Suitable for one-component glue (such as polyurethane glue, epoxy glue), viscosity range of 100 – 15000mPa.s two-component glue (such as polyurethane glue, epoxy glue), viscosity range of 100 – 15000mPa .s 3. Function introduction The glue spraying machine sprays the glue through high-pressure gas atomization. The amount of glue sprayed is determined by the speed of the metering pump and the size of the glue nozzle. The degree of atomization is adjusted by controlling the atomization air pressure. . The glue spraying machine is used to accurately measure one-component glue or two-component glue, and evenly coat the surface of the workpiece. According to the characteristics of the glue, it can be equipped with functions such as automatic feeding, automatic heating, automatic cleaning, nitrogen filling protection, and overpressure alarm. 4. Working principle Since the glue should not come into contact with the air too much, the entire glue circuit is designed as a closed type, namely: raw material large rubber barrel (200L) & rarr; chemical automatic feeding pump & rarr; host intermediate tank & rarr; filtration & rarr; precision metering & rarr ; Spraying.


Parameters

Unit

Main function

Longitudinal movement of the two-axis actuator (X-axis: horizontal movement of the glue head on the rail; Y-axis: manual adjustment of the up and down of the glue head); Built-in automatic glue application program (the glue track is customized by the manufacturer, and the workpiece margin can be Manual setting); Automatically clean the left and right workstations after the glue is sprayed; The glue storage barrel has automatic heating function;

Power source

Voltage 380V/220V, 50Hz.

Maximum glue output

8kg/min

Range of coating width

0~1250mm

Positioning accuracy

±5mm/10000mm

Low pressure foaming machine material tank Volume 30L
Automatic cleaning of the tank Volume 18L
Electronic control system Electric control system Independent control; automatic feeding system; with over-current, over-load, short-circuit, and lack of equal protection.
Service life Except for wearing parts, the design life of the equipment is ≥10 years.

Recommended