EPS Block Cutting Machine


1. The machine is mainly composed of thick wall special-shaped square pipe welded and assembled, which can be disassembled freely. 2. EPSBC6000 adopts horizontal, vertical and end face cutting wire to achieve three-dimensional plate cutting

1. The machine is mainly composed of thick wall special-shaped square pipe welded and assembled, which can be disassembled freely. 2. EPSBC6000 adopts horizontal, vertical and end face cutting wire to achieve three-dimensional plate cutting. The end face cutting wire is equipped with a separate cutting car, which can work with horizontal and vertical cutting wire at the same time. 3. The machine uses 10KVA multi-tapped special transformer, can use 50 heating wires at the same time, transformer capacity is large, wide range of voltage regulation; 4. The machine adopts full frequency governor, arbitrary speed regulation between 0-4M /min, and smooth operation, flat cutting plate, stable size; 5. Optional automatic control for face cutting; 6. EPSBC6000/V lengthening vertical plate cutting machine can simultaneously cut various sizes of small plates in the vertical direction, the diagonal size error of cutting products is less than 1.0mm, suitable for wall insulation; 7. EPSBC6000/C is on the basis of the EPSBC6000 optional corrugated cutting device, the device can cut wall insulation used for a variety of EPS dovetail trough board, waveform board, rectangular board, etc., the device uses a single chip microcomputer control system, in the control system set cutting parameters, drive the stepping motor to cut according to the set parameters.


Serial number Project Model/Unit EPSBC4000/L EPSBC5000/L EPSBC6000/L
1 Maximum size of processed product mm 4050 5080 6080
2 Minimum cutting thickness mm 10 10 10
3 Cutting speed m/min 0-4.5
Frequency conversion speed regulation
0-4.5
Frequency conversion speed regulation
0-4.5
Frequency conversion speed regulation
4 Participate in cutting the number of heating wires at the same time Piece 50 50 50
5 Electric heating wire specifications mm 0.4-0.8 0.4-0.8 0.4-0.8
6 Motor power kw 38 40 45
7 Transformer capacity kw 36 36 36
8 Maximum outline size mm 25000X1600X2400 29000X1600X2400 34000X1600X2400
9 Machine weight kg 2800 3200 3800

Recommended