1. The machine is by controlling the synchronous operation of the X-axis (transfer belt for carrying printing S block material) and the ya axis (hot wire rack for carrying resistance wire) to combine into graphics, and at the same time, the resistance wire is used to cut EPS products of various shapes. Its movement route is to use the input computer graphics, automatically send out pulse signal to control the X, the ya axis operation;
2. There are two ways to input the computer's product graphics: directly use the computer dedicated AutoCAD software to draw or use the scan board to input the graphics to the computer;
3. Single line CNC copying cutting machine is suitable for cutting large volume or small quantity of products;
4. Multi-line CNC copying cutting machine is suitable for cutting small volume or large number of products. Resistance wire cutting system can be used at the same time up to 20 resistance wires, graphics input computer, all resistance wires can run parallel; Cutting up to 20 complex two-dimensional bodies at a time
Serial number |
Project |
Model/Unit |
EPSCNC2-2000x1240 |
EPSCNC2-3000x3000 |
EPSCNC2-4000x4000 |
1 |
Maximum size of processed product |
mm |
2000x1240x1240 |
3000x3000x1240 |
4000x4000X1240 |
2 |
Cutting wire length |
mm |
2000 |
3000 |
4000 |
2 |
Cutting thickness |
mm |
0-1240 |
0-1240 |
0-1240 |
3 |
Cutting speed |
m/min |
0-3.5
Frequency conversion speed regulation |
0-3.5
Frequency conversion speed regulation |
0-3.5
Frequency conversion speed regulation |
4 |
Participate in cutting the number of heating wires at the same time |
Piece |
1-20 |
1-20 |
1-20 |
5 |
Electric heating wire specifications |
mm |
0.4-0.8 |
0.4-0.8 |
0.4-0.8 |
6 |
Motor power |
kw |
2.25 |
|
7 |
Tra |
|
|
|
|