EPS 3D CNC Shape Cutting Machine


1. The machine is by controlling the synchronous operation of the X-axis (the transfer belt for carrying the block material) and the ya axis (the hot wire frame for carrying the resistance wire) to combine the graphics, and at the same time

1. The machine is by controlling the synchronous operation of the X-axis (the transfer belt for carrying the block material) and the ya axis (the hot wire frame for carrying the resistance wire) to combine the graphics, and at the same time, the resistance wire is used to cut EPS products of various shapes. Its movement route is to use the input computer graphics, automatically send out pulse signal to control the X, the ya axis operation configuration rotation device can realize three-dimensional cutting;
 
2 input computer product graphics have two methods: direct use of computer dedicated AutoCAD software drawing or using scan drawing board graphics input computer;
 
3. Single line CNC copying cutting machine is suitable for cutting large volume or small quantity of products;
 
4. Multi-line CNC copying cutting machine is suitable for cutting small volume or large number of products. The resistance wire cutting system can use up to 20 resistance wires at the same time. After the graphic is input to the computer, all resistance wires can run in parallel, cutting up to 20 complex three-dimensional shapes at a time
 


序号 项目 型号/单位 EPSCNC3-2000x1240 EPSCNC3-3000x3000 EPSCNC3-4000x4000
1 加工制品最大尺寸 mm 2000x1240x1240 3000x3000x1240 4000x4000X1240
2 切割丝长度 mm 2000 3000 4000
2 切割厚度 mm 0-1240 0-1240 0-1240
3 切割速度 m/min 0-3.5
变频调速
0-3.5
变频调速
0-3.5
变频调速
4 同时参加切割电热丝数量 Piece 1-20 1-20 1-20
5 电热丝规格 mm 0.4-0.8 0.4-0.8 0.4-0.8
6 电机功率 kw 2.25 2.25 3.0
7 变压器容量 kw 8 8 8
9 CNC控制方式   全自动 全自动 全自动
10 控制软件   AutoCAD AutoCAD AutoCAD
11 切割模式   三维 三维 三维
12 最大外形尺寸 mm 2500x2000x2500 3500x3500x2500 4500x4500x2500
13 整机重量 kg 1800 2300 2800

Recommended